Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Sporranlegion

Pages: [1]
1
General Discussions / Re: Use default channel to enter server
« on: October 30, 2018, 12:32:15 PM »
I got it to work using the AutoMove function  8)
Had to rearrange some of the channels and the ID's but on the positive side that means I learn more on how the bot works

2
General Discussions / Re: Use default channel to enter server
« on: October 28, 2018, 04:20:01 PM »
I will have another look at the automove function, maybe I can use it.

I was hoping there was a way to remove the option that allows a client to set their own default join channel.

3
General Discussions / Re: Use default channel to enter server
« on: October 27, 2018, 01:19:09 AM »
I only want them to enter the server using the default channel then they can join any channel they want, if I move joining power I will restrict their movements.
Some of the members have set a specific channel to join when they join the server and they dont come in the front door so they miss any messages that are there.

4
General Discussions / Use default channel to enter server
« on: October 27, 2018, 01:03:30 AM »
Hi Stefan,

Is it possible to use the bot to only allow entry to the server through the default channel only.
Can I stop members from entering the server to any channel of their choice, I only want them to enter on the default channel only.

5
General Discussions / Re: How to split message into multiple message
« on: October 20, 2018, 02:17:49 PM »
Thank you Stefan, it's working now

6
General Discussions / Re: How to split message into multiple message
« on: October 20, 2018, 01:15:45 PM »
Tried the code suggested as below but I still get the same resulting error "message is to long"

You were moved to channel "%MUTE_CHANNEL_NAME%" because your client status is muted.§+§You will be moved back if your client status is not muted anymore.

# JTS3ServerMod Config File
# Away Mover message, the client get this message as chat message.
# You can use the following keywords, which will be replaced:
# %AWAY_CHANNEL_NAME% - This will be replaced with the name of the specified channel
# Typical BBCode like in Teamspeak 3 Client possible. You can use \n for a new line.
# Use the character sequence §+§ to split a long message into multiple messages.
You were moved to channel "%MUTE_CHANNEL_NAME%" because your client status is muted.§+§You will be moved back if your client status is not muted anymore.

7
General Discussions / Re: How to split message into multiple message
« on: October 20, 2018, 02:06:25 AM »
Those characters looked like $ (dollar) signs, no wonder it didn't work in the cfg file.
They are alt keyboard characters § (Alt 0167)

 Is this the correct syntax {You were moved to channel "%MUTE_CHANNEL_NAME%" because your client status is muted. §+§ You will be moved back if your client status is not muted anymore.}

Or is it like this {You were moved to channel "%MUTE_CHANNEL_NAME%" because your client status is muted. §!=§ You will be moved back if your client status is not muted anymore.}

8
General Discussions / Re: How to split message into multiple message
« on: October 19, 2018, 08:02:13 PM »
I dont know where to put it  ;D
I tried like this {You were moved to channel "%MUTE_CHANNEL_NAME%" because your client status is muted. $+$ You will be moved back if your client status is not muted anymore.} but it didnt work
if you can show me where you would put it as an example then I can work out the rest

9
General Discussions / Re: How to split message into multiple message
« on: October 19, 2018, 07:46:25 PM »
At the moment I am using the default message [You were moved to channel "%MUTE_CHANNEL_NAME%" because your client status is muted. You will be moved back if your client status is not muted anymore.] which has 150 charterers

10
General Discussions / How to split message into multiple message
« on: October 19, 2018, 07:37:11 PM »

I have tried to split a long message into multiple messages using the sequence $+$ but I still get an error that the message is longer than 100 characters. I have looked around for BB code but cant find any reference to this sequence or how to use it.
I have set up the message to be delivered with a poke.
Can someone please give me an example?

# Typical BBCode like in Teamspeak 3 Client possible. You can use \n for a new line.
# Use the character sequence §+§ to split a long message into multiple messages.
You were moved to channel "%MUTE_CHANNEL_NAME%" because your client status is muted. You will be moved back if your client status is not muted anymore.

11
General Discussions / Re: Channel notify exception error.
« on: October 16, 2018, 09:57:43 PM »
Thanks Stefan, I should have realized the mistake sooner but the more you look for a solution to a problem you forget to look for the simple solution  8)

12
General Discussions / Re: Channel notify exception error.
« on: October 16, 2018, 09:50:16 PM »
Should

# Channel id that should be watched for new clients. You can only set one channel id here!
Channelnotify_channel_id = -1

be

# Channel id that should be watched for new clients. You can only set one channel id here!
channelnotify_channel_id = -1

13
General Discussions / Re: Channel notify exception error.
« on: October 16, 2018, 09:45:31 PM »
Now I'm confused .........
Am I looking for a case sensitive error then, have I set something with lower case instead of upper case.
I will check the cfg file again

14
General Discussions / Re: Channel notify exception error.
« on: October 16, 2018, 09:33:26 PM »
I have set the value of Channelnotify_channel_id as 1 in the config file havent I ?

 # Channel id that should be watched for new clients. You can only set one channel id here!
Channelnotify_channel_id = 1

or is the error pointing to a different command.

15
General Discussions / Channel notify exception error.
« on: October 15, 2018, 10:51:58 PM »
I have started useing JTS3 servermod on our teamspeak server. The server is running on my network with servermod running on the same machine.
I keep getting an exception error on the channel notify function. Where have I gone wrong ???

Server cfg file...............................................................
#BOT WATCHING FOR NEW GUEST
   # Channel id that should be watched for new clients. You can only set one channel id here!
Channelnotify_channel_id = 1

   # A comma separated list (without spaces) of server group ids.
   # Depends on the given mode, this server groups can be ignored or only this server groups will be watched!
   # If no server groups should be ignored, set no server groups here and select the group list mode ignore!
Channelnotify_group_list = 8

   # Select one of the two modes for the server group list.
   # ignore = The selected server groups will be ignored.
   # only = Send a notify message only if the selected server groups join the channel.
Channelnotify_group_list_mode = only

   # A comma separated list (without spaces) of server group ids, which should be notified about new clients in the specified channel.
Channelnotify_grouptargets = 6,23

   # A comma separated list (without spaces) of channel ids.
   # Depends on the given mode, target clients in this channels can be ignored or only clients in this channels receive the notify message!
   # If no channels should be ignored, set no channels here and select the channel list mode ignore!
Channelnotify_channel_list =

   # Select one of the two modes for the channel list.
   # ignore = Clients in the selected channels will be ignored.
   # only = Only clients in the selected channels receive the notify message.
Channelnotify_channel_list_mode = ignore

   # Select the message mode, how the notified clients should get the message.
   # poke or chat are valid values!
Channelnotify_message_mode = poke

   # Select the message mode, how the clients (who joined the channel) should get the message.
   # poke, chat or none are valid values!
Channelnotify_messagenotified_mode = none

   # Path to file which contains the channel notify message
Channelnotify_file = config/server1/channelnotifymessages.cfg


Server log file...............................
2018-10-14 13:53:35   JTS3ServerMod   STATUS   Virtual bot instance "serverbot" starts now (build 6501)
2018-10-14 13:53:35   JTS3ServerMod   STATUS   Activate log level: INFO
2018-10-14 13:53:35   JTS3ServerMod   INFO   Successfully loaded function: IdleCheck / idle
2018-10-14 13:53:35   JTS3ServerMod   INFO   Successfully loaded function: IdleCheck / idle_guest
2018-10-14 13:53:35   JTS3ServerMod   INFO   Successfully loaded function: MuteMover / mute
2018-10-14 13:53:35   JTS3ServerMod   INFO   Successfully loaded function: WelcomeMessage / welcome
2018-10-14 13:53:35   JTS3ServerMod   INFO   Successfully loaded function: Advertising / advertising
2018-10-14 13:53:35   JTS3ServerMod   INFO   Successfully loaded function: ChannelNotify / channelnotify
2018-10-14 13:53:35   Function idle   INFO   All idle time limits are disabled, Idle Check function will be disabled now!
2018-10-14 13:53:35   Function idle_guest   INFO   All idle time limits are disabled, Idle Check function will be disabled now!
2018-10-14 13:53:35   Function mute   ERROR   Exception in loadConfig(), disable() or activate()!
2018-10-14 13:53:35   Function mute   EXCEPTION   de.stefan1200.jts3servermod.BotConfigurationException: Headphone and Microphone detection in config disabled!
2018-10-14 13:53:35   Function channelnotify   ERROR   Exception in loadConfig(), disable() or activate()!
2018-10-14 13:53:35   Function channelnotify   EXCEPTION   java.lang.NumberFormatException: Config value of "channelnotify_channel_id" is not a number! Current value: not set
2018-10-14 13:53:36   JTS3ServerMod   INFO   Successful connected to 127.0.0.1!
2018-10-14 13:53:36   JTS3ServerMod   INFO   Login as "Server_BOT" successful!
2018-10-14 13:53:36   JTS3ServerMod   INFO   Successful selected virtual server on port 9987!
2018-10-14 13:53:36   JTS3ServerMod   WARNING   Unable to receive permission list! If possible, please set the permission "b_serverinstance_permission_list" to the bot query account "Server_BOT" or the "Guest Server Query" group.
2018-10-14 13:53:36   JTS3ServerMod   INFO   Server connection log is activated and will be written into the file: C:\TeamSpeak Server\JTS3ServerMod_6.5.0\JTS3ServerMod\JTS3ServerMod_server1_login.csv
2018-10-14 13:53:36   Function welcome   INFO   All new connecting clients get the welcome message from file config/server1/welcomemessages.cfg
2018-10-14 13:53:36   Function advertising   INFO   Advertising will be send to virtual server every 5 minutes (1 messages found)
2018-10-14 13:53:36   JTS3ServerMod   INFO   Bot started and connected successful, write !botinfo in server chat to get an answer!
2018-10-14 13:53:36   JTS3ServerMod   INFO   Creating client database cache...
2018-10-14 13:53:41   JTS3ServerMod   INFO   Client database cache created, 25 clients in cache.
2018-10-14 13:54:22   JTS3ServerMod   INFO   Got command from Sporranlegion: !botconfirmerrors
2018-10-14 14:03:30   JTS3ServerMod   INFO   Got command from Sporranlegion: !botcfgreload
2018-10-14 14:03:30   Function idle   INFO   All idle time limits are disabled, Idle Check function will be disabled now!
2018-10-14 14:03:30   Function idle_guest   INFO   All idle time limits are disabled, Idle Check function will be disabled now!
2018-10-14 14:03:30   Function mute   ERROR   Exception in loadConfig(), disable() or activate()!
2018-10-14 14:03:30   Function mute   EXCEPTION   de.stefan1200.jts3servermod.BotConfigurationException: Headphone and Microphone detection in config disabled!
2018-10-14 14:03:30   Function channelnotify   ERROR   Exception in loadConfig(), disable() or activate()!
2018-10-14 14:03:30   Function channelnotify   EXCEPTION   java.lang.NumberFormatException: Config value of "channelnotify_channel_id" is not a number! Current value: not set

Any help would be appreciated
Thanks.

Pages: [1]